Posted by OXTERstock Blogger
Information
June 28, 2024
Painting wood with Asian PU (Polyurethane) Palette Paint can give your furniture or wooden surfaces a durable and attractive finish. This blog will guide you through the step-by-step process, including the cost and area coverage considerations for doing this in India.
Materials Needed
- Asian PU Palette Paint
- Primer
- Sandpaper (grit sizes 180, 220, and 320)
- Paintbrushes or spray gun
- Paint roller
- Painter’s tape
- Drop cloths or plastic sheets
- Safety gear (gloves, mask, goggles)
- Wood filler (if needed)
Step-by-Step Process
1. Prepare the Surface
- Clean the Wood: Start by cleaning the wooden surface to remove dust, dirt, and grease. You can use a mild detergent solution and a clean cloth.
- Sand the Surface: Use 180-grit sandpaper to sand the surface. This helps in removing any old paint or varnish and smoothens the surface. After sanding, wipe the surface with a damp cloth to remove the dust.
2. Fill Imperfections
- Apply Wood Filler: If there are any holes, cracks, or imperfections, fill them with wood filler. Allow it to dry completely.
- Sand Again: Once the wood filler is dry, sand the filled areas with 220-grit sandpaper until smooth. Wipe the surface clean.
3. Apply Primer
- Choose the Right Primer: For Asian PU Palette Paint, a PU primer is recommended.
- Apply Primer: Use a paintbrush or roller to apply a thin, even coat of primer. Allow it to dry according to the manufacturer’s instructions. This typically takes 4-6 hours.
- Sand the Primer: Lightly sand the primed surface with 320-grit sandpaper to ensure smoothness. Wipe away the dust with a clean cloth.
4. Apply the Paint
- Stir the Paint: Thoroughly stir the Asian PU Palette Paint to ensure even color and consistency.
- First Coat: Apply the first coat of paint using a high-quality paintbrush, roller, or spray gun. Use even strokes and avoid overloading the brush or roller to prevent drips and uneven coverage.
- Drying Time: Let the first coat dry for about 6-8 hours.
- Sand Between Coats: Lightly sand the surface with 320-grit sandpaper to remove any imperfections. Wipe clean before applying the next coat.
- Second Coat: Apply a second coat of paint. For a more durable finish, a third coat can be applied following the same steps.
5. Finishing Touches
- Final Sanding: After the last coat is dry, do a final light sanding for a smooth finish.
- Clean Up: Remove any painter’s tape and drop cloths. Clean your brushes and rollers according to the paint manufacturer’s recommendations.
Costing in India
- Asian PU Palette Paint: The cost ranges from ₹400 to ₹600 per liter.
- Primer: PU primer costs around ₹200 to ₹400 per liter.
- Sandpaper: A pack of assorted grit sandpapers costs about ₹100 to ₹200.
- Wood Filler: A small tin costs around ₹100 to ₹200.
- Paintbrushes and Rollers: Good quality brushes and rollers can cost between ₹200 to ₹500.
Assuming you need about 2 liters of paint and 1 liter of primer for a medium-sized project:
- Paint: ₹1,000
- Primer: ₹300
- Sandpaper: ₹150
- Wood Filler: ₹150
- Brushes and Rollers: ₹350
Total Estimated Cost: ₹1,950
Area Coverage
On average, 1 liter of Asian PU Palette Paint covers approximately 100-120 square feet per coat. Considering two coats for optimal finish:
- 2 liters of Paint: 200-240 square feet for two coats.
Conclusion
Applying Asian PU Palette Paint on wood is a straightforward process if you follow the steps meticulously. The cost and coverage estimates can help you plan your project efficiently. With patience and attention to detail, you can achieve a professional-quality finish on your wooden surfaces.
